Parcel Orders over $300 Ship Free.
Metzger McGuire Edge-Pro 80 Burnt Sienna 10 Gallon Unit MMEP80-PT
Metzger McGuire Edge-Pro 80 Burnt Sienna is a two-part 100% solids rapid-setting polyurea joint filler in a 10 gal kit for stained and polished retail slabs. The filler is ground flush so construction-joint edges stay protected.
- Tack-free in 3 minutes
- Wet grind at 30 minutes
- Dry grind at 3-4 hours
$605.00
Drop Shipped
Metzger McGuire Edge-Pro 80 - Burnt Sienna 10 Gallon Unit MMEP80-PT
Metzger McGuire Edge-Pro 80 is a two-part 100% solids rapid-setting polyurea joint filler in Burnt Sienna. It is used on stained and polished retail interiors where a flush filler is ground with the slab and still protects construction-joint edges. It is placed as a 10 gal kit of two 5 gal pails. Wet grind or polish can start at 30 minutes, dry grind is 3 to 4 hours at 70 F, and tack-free time is 3 minutes.
Key Features
- This Burnt Sienna filler is used on stained and polished retail interiors.
- Tack-free time is 3 minutes at 70 F.
- Wet grind can start 30 minutes after placement.
- Dry grind waits 3 to 4 hours.
- The slab is at least 28 days old before this filler is placed.
- This Burnt Sienna kit carries USDA, FDA, and CFIA acceptance.
Applications
- Stained and polished retail interiors are filled with this polyurea.
- Construction joints are ground flush with the slab.
- Burnt Sienna is the color on those stained retail slabs.
- Placement waits until the slab is at least 28 days old.
Technical Specifications
| Property | Value |
|---|---|
| Hardness, Shore A @ 70 F | 80-81 (D-2240) |
| Tensile Strength | 505 psi (D-638) |
| Tensile Elongation | 152% (D-638) |
| Gel Time @ 70 F | 35 seconds |
| Tack Free @ 70 F | 3 minutes |
| Traffic Ready @ 70 F | 1 hour |
| Mix Ratio (by vol.) | 1:1 |
| Operating Temperature | -20 F to +120 F interior |
| Shave Window | 15 min to 24 hrs |
| Packaging | 10 gallon (US) kits (2-5 gallon US pails), Burnt Sienna |
Product documents: Edge-Pro 80 Technical Data Sheet EP-1 REVISED 9/25 (PDF) | Edge-Pro 80 Safety Data Sheet 10/2024 (PDF)
Frequently Asked Questions
What stained-floor work is Metzger McGuire Edge-Pro 80 used on?
This Burnt Sienna polyurea fills stained and polished retail interiors so construction-joint edges stay protected after a flush grind.
What size is Metzger McGuire Edge-Pro 80?
The Burnt Sienna kit is a 10 gal kit (two 5 gal pails).
What dry-grind window is on Metzger McGuire Edge-Pro 80?
This Burnt Sienna kit waits 3 to 4 hours before a dry grind at 70 F.
What slab wait is on Metzger McGuire Edge-Pro 80?
This Burnt Sienna kit waits until the concrete is at least 28 days old.
What food-facility marks are on Metzger McGuire Edge-Pro 80?
This Burnt Sienna kit carries USDA, FDA, and CFIA acceptance for inspected interiors.
What tack-free minutes are on Metzger McGuire Edge-Pro 80?
Burnt Sienna reaches tack-free in 3 minutes at 70 F.
Please complete your information below to login.