Parcel Orders over $300 Ship Free.
Dayton Superior Unitex Pro-Poxy 300 2 Gallon Unit 140144
Pro-Poxy 300 is a moisture-tolerant 1:1 epoxy gel for anchoring bolts, dowels, and rebar in concrete.
- Vertical and horizontal structural bonding
- Non-sag gel that also sets injection ports
- Standard set, not Pro-Poxy 300 Fast
$326.99
Availability:
Out of stock
Dayton Superior Pro-Poxy 300 Epoxy Gel, 2 Gallon Unit
Pro-Poxy 300 is a two-component, 100% solids, moisture-tolerant, high-modulus epoxy gel for anchoring bolts, dowels, and reinforcing steel. The non-sag 1:1 mix also handles vertical and horizontal structural bonding and can seal cracks and set injection ports. Gel time is about 24 minutes at 73°F. This is standard Pro-Poxy 300, not 300 Fast. Also available as the Pro-Poxy 300 600 ml cartridge.
Looking for another size?
Key Features
- Non-sag gel for anchoring bolts, dowels, rebar, and threaded rod
- Moisture-tolerant 1:1 high-modulus epoxy
- Vertical and horizontal structural bonding and patching
- Seals cracks and sets injection ports
- Mixes gray with a non-sag consistency
- Use at 40°F and above on prepared concrete
Applications
- Anchoring bolts, dowels, and reinforcing steel
- Vertical and horizontal structural bonding
- Crack sealing and injection-port setting
- Threaded rod in drilled holes
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | Two-component epoxy gel, 1:1 by volume |
| Mixed color | Gray |
| Consistency | Non-sag gel |
| Gel time (60 g) | 24 min at 73°F; 68 min at 50°F |
| Compressive yield | 15,600 psi at 7 days, 73°F (ASTM D695) |
| Bond strength, 2 day | 2,770 psi at 73°F (ASTM C882) |
| ASTM C881 / AASHTO M235 | Types I, II, IV, V, Grade 3, Classes B and C |
| VOC | 0 g/L |
| Application temperature | 40°F (5°C) and above |
| Storage | 40 to 95°F |
| Packaging | 2 gallon unit |
Product documents: Pro-Poxy 300 Technical Data Sheet (PDF)
Frequently Asked Questions
What is Pro-Poxy 300?
Pro-Poxy 300 is a two-component, 100% solids, moisture-tolerant, high-modulus epoxy gel for anchoring, structural bonding, and setting injection ports. It is not the Fast or Paste versions.
How do the pack sizes compare?
This page is the 2 gallon unit. The same gel is also listed as the Pro-Poxy 300 600 ml cartridge.
Is this the same as Pro-Poxy 300 Fast?
No. Pro-Poxy 300 Fast is a separate fast-set gel with a shorter gel time. This page is standard Pro-Poxy 300.
What is the gel time?
About 24 minutes at 73°F and 68 minutes at 50°F on a 60 gram mass. Condition material to 65 to 85°F before mixing.
Please complete your information below to login.