Parcel Orders over $300 Ship Free.
Dayton Superior Pro-Poxy 100 1 Gallon 140048
Dayton Superior Pro-Poxy 100 is a low-viscosity, 100% solids epoxy for gravity or pressure injection of 1/8 in to 1/4 in cracks.
- 2:1 mix, moisture tolerant
- High-modulus Grade 1 resin
- 1 gal unit; cartridge also stocked
$114.38
Availability:
Out of stock
Dayton Superior Pro-Poxy 100 Epoxy Injection Resin, 1 Gallon
Dayton Superior Pro-Poxy 100 is a 100% solids, high-modulus, moisture-tolerant, low-viscosity epoxy for gravity-feed or pressure injection of fine to medium cracks. Primary use is 1/8 in to 1/4 in cracks in concrete and masonry. Mix 2:1 by volume. This page is the 1 gal unit; a 13.5 oz cartridge is stocked for smaller injection jobs. Seal the surface with a gel epoxy before injecting.
Looking for another size?
Key Features
- Low-viscosity resin for gravity or pressure injection.
- High-modulus, moisture-tolerant, 100% solids.
- Sized for 1/8 in to 1/4 in cracks.
- 2:1 mix, Part A to Part B.
- Can seal interior slabs and above-grade exterior slabs.
- Cartridge pack available for gun injection.
Applications
- Pressure injection of structural cracks.
- Gravity-feed repair of fine to medium cracks.
- Interior slab sealing.
- Above-grade exterior slab sealing.
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Dayton Superior |
| Product | Pro-Poxy 100 |
| Type | Low-viscosity epoxy injection resin |
| ASTM C881 / AASHTO M235 | Types I, II, IV & V, Grade 1, Class C |
| Mix ratio | 2:1 by volume |
| Viscosity | 610 cP |
| Gel time, 60 g | 30 min |
| Compressive yield | 12,200 psi |
| VOC | 0 g/L |
| Packaging | 1 gal unit |
Product documents: Pro-Poxy 100 Technical Data Sheet (PDF)
Frequently Asked Questions
What crack width?
Dayton sizes Pro-Poxy 100 for about 1/8 in to 1/4 in cracks. Finer hairlines may need a lower-viscosity resin such as Pro-Poxy 50.
Mix ratio?
2:1 Part A to Part B by volume.
Do I need surface seal?
Yes. Seal the crack face with Sure Anchor J51 or Pro-Poxy 300 Fast gel, set ports, then inject.
Cartridge version?
Yes. Indcon stocks a 13.5 oz (400 ml) cartridge of the same chemistry.
Please complete your information below to login.