Parcel Orders over $300 Ship Free.
Dayton Superior Pro-Flex 10 Gallon 140266
Dayton Superior Pro-Flex is a 100% solids, two-component epoxy joint filler in a 10 gallon kit for saw-cut industrial floors. The 1:1 mix is pourable and moisture tolerant, so hard-wheeled traffic does not break down the joint edges.
- 1:1 mix is pourable for industrial floor joints
- Joints keep moderate movement without welding the slabs together
- Ready to shave flush in about 3 to 5 hours at 75 F
$1,287.12
Availability:
Out of stock
Dayton Superior Pro-Flex
Dayton Superior Pro-Flex is a 100% solids, two-component epoxy joint filler in a 10 gallon kit for saw-cut industrial floors. The 1:1 mix is pourable and moisture tolerant, so hard-wheeled traffic does not break down the joint edges. Product code is 140266. Working time is about 75 minutes at 75 F. The fill meets ACI 302 for joint fillers under hard-wheeled traffic.
Key Features
- 100% solids epoxy joint filler is used on saw-cut industrial floors
- 1:1 mix is pourable for industrial floor joints
- Joints keep moderate movement without welding the slabs together
- Ready to shave flush in about 3 to 5 hours at 75 F
- Hard-wheeled traffic is the design case per ACI 302
Applications
- Saw-cut contraction joints are filled on industrial floors with hard-wheeled traffic
- Formed construction joints hold a 1 in minimum fill depth
- Damaged cracks are repaired on the same industrial slabs
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | 100% solids two-component epoxy joint filler |
| Pack | 10 gallon kit |
| Product code | 140266 |
| Mix ratio | 1:1 by volume |
| Color mixed | Light gray |
| Working time at 75 F | About 75 minutes |
| Shave time at 75 F | 3 to 5 hours |
| Full cure at 75 F | About 20 hours |
| VOC | 0 g/L |
| Shore D at 14 day | 55 |
| Tensile elongation 7 day | 49.2% |
Product documents: Dayton Superior Pro-Flex Data Sheet (PDF)
Frequently Asked Questions
What floors is Dayton Superior Pro-Flex used on?
Industrial floors with hard-wheeled traffic. Saw-cut contraction and construction joints, plus damaged cracks on those slabs.
What kit size is Dayton Superior Pro-Flex?
This listing is the 10 gallon kit, code 140266. Mix 1:1 by volume and pour into the joint.
What working time does Dayton Superior Pro-Flex have?
About 75 minutes at 75 F. Full cure is about 20 hours at that temperature.
What color does Dayton Superior Pro-Flex mix to?
Light gray after a 1:1 mix.
What ACI recommendation does Dayton Superior Pro-Flex meet?
ACI 302 for joint fillers under hard-wheeled traffic. Fill saw-cut joints full depth.
What wait does Dayton Superior Pro-Flex need on new concrete?
ACI 302 recommends waiting until shrinkage has occurred, a minimum of 3 months for semi-rigid epoxies.
Please complete your information below to login.