Parcel Orders over $300 Ship Free.
Dayton ProAnchor Elite 22oz Cartridge Case 12 100862
ProAnchor Elite is a 100% solids high-modulus epoxy gel for threaded rod and rebar in cracked or uncracked concrete.
- Dry, water-saturated, and water-filled holes
- Seismic design categories A through F
- About 16 min working time at 75°F
$636.34
Availability:
Out of stock
Dayton Superior ProAnchor Elite Anchoring Epoxy
ProAnchor Elite is a two-component, 100% solids, high-modulus epoxy gel for threaded rod and reinforcing bar in cracked or uncracked concrete. It is approved for dry, water-saturated, and water-filled holes, including vertical and horizontal placements, and is qualified for seismic design categories A through F. Working time is about 16 minutes at 75°F, with a 7-hour full cure.
Key Features
- High-modulus epoxy gel for threaded rod and rebar
- Cracked and uncracked concrete
- Dry, water-saturated, and water-filled holes
- Seismic design categories A through F
- Vertical and horizontal structural bonding
- IAPMO ER-690 evaluation
Applications
- Threaded rod in cracked or uncracked concrete
- Reinforcing bar doweling
- Dry, damp, and water-filled holes
- Seismic and DOT anchoring work
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | Two-component, 100% solids high-modulus epoxy gel |
| ASTM C881 / AASHTO M235 | Types I, II, IV and V; Grade 3; Classes A, B and C (gel time excepted) |
| Evaluation | ACI 355.4 / ICC-ES AC308 per IAPMO ER-690 |
| Working / full cure | 16 min / 7 hr at 75°F |
| Hole conditions | Dry, water-saturated, and water-filled |
| Seismic | Design categories A through F |
| VOC | 0 g/L |
| Packaging | 21.2 fl oz (627 ml) cartridge |
| Min concrete age (anchoring) | Per ACI 355.4 |
| UL / USDA | Drinking water system components; USDA inspected facilities |
Product documents: ProAnchor Elite Technical Data Sheet (PDF)
Frequently Asked Questions
What is ProAnchor Elite?
A two-component, 100% solids, high-modulus epoxy gel for threaded rod and rebar in cracked or uncracked concrete.
Can it be used in wet holes?
Yes. It is listed for dry, water-saturated, and water-filled holes. Follow the printed installation instructions.
What is the working and full cure time?
At 75°F, working time is about 16 minutes and full cure is about 7 hours. Do not disturb, torque, or load until full cure.
Does it meet ASTM C881?
Yes. Types I, II, IV and V, Grade 3, Classes A, B and C, except gel time due to fast set. Evaluated to IAPMO ER-690.
Please complete your information below to login.