VersaFlex SL/75 Joint Sealant Cartridge 600ml Light Gray Case 10

Polyurea joint filler used to fill interior random cracks, control joints, or new construction joints on horizontal concrete surfaces. SL/75 is designed specifically for industrial floor applications receiving heavy vehicle traffic, such a forklift or steel wheeled carts.

100% Solids
Odorless
USDA Approved

$676.91

Drop Shipped

SKU

20919

VersaFlex SL/75 Joint Sealant – Light Gray – 600ml Cartridge (Case of 10)

VersaFlex SL/75 is a two-component, 100% solids, self-leveling polyurea joint filler formulated for horizontal concrete applications exposed to heavy traffic. SL/75 offers fast cure, excellent flexibility, and high elongation, protecting joint edges from spalling while accommodating 10–15% movement. Designed for industrial floors, freezers, food processing facilities, and polished concrete systems, SL/75 cures quickly for fast return to service and resists moisture, fuels, and cleaning chemicals.

Key Features:

100% solids – zero VOC
Flexible and pick-resistant with high elongation
Rapid cure: tack free in 2–3 minutes
Foot traffic ready in 60 minutes
Suitable for –40°F to 200°F+ environments
Odorless, non-toxic vapors
USDA/FSIS and CFIA approved for food facilities
Resists fuel, moisture, and abrasion

Applications:

Industrial floors and loading docks
Polished concrete systems
Cold storage and freezer facilities
Food processing plants
Correctional institutions and traffic loops
Airport terminals and hangars

Technical Specifications:

Property	Value
Mix Ratio	1:1
VOC	0 g/L
Tack Free Time	2–3 minutes
Foot Traffic	60 minutes
Tensile Strength	600–1200 psi
Tensile Elongation	240–500%
Adhesion to Concrete	300–450 psi
Tear Strength	150–300 lb/in
Shore A Hardness	≥ 75
Abrasion Resistance (mg loss)	375–500 (ASTM D4060)
Temperature Service Range	–40°F to 200°F+
Cartridge Size	600ml (300ml A + 300ml B)
Packaging	Case of 10 cartridges
Shelf Life	1 year (unopened)

Frequently Asked Questions:

Can SL/75 be used in freezers or cold storage?
Yes. It is designed to remain flexible and perform in temperatures as low as –40°F, making it ideal for cold environments.

Is SL/75 recommended for use under epoxy or polymer floor systems?
No. It should not be used under non-breathing or resilient flooring systems. Refer to technical bulletin for exceptions.

Can SL/75 be used outdoors?
SL/75 is not recommended for exterior use if thermal cycling may cause joint movement. Limited exterior use may be acceptable where thermal expansion is minimal.

What is the difference between SL/75 and SL/60?
SL/75 is a higher durometer joint filler with increased tear strength and is more resistant to mechanical damage under heavy industrial loads.

More Information