Unitex Pro-Poxy 50, 1 gallon 140004. 100% solids moisture-tolerant epoxy for gravity feed or pressure injection of fine cracks in concrete and masonry. Mix 2:1. About 27 minutes pot life at 75 F.
Unitex Pro-Poxy 50 is a 100% solids, high-modulus, moisture-tolerant epoxy for gravity feed or pressure injection of fine cracks in concrete and masonry. This 1 gallon unit mixes 2 to 1 by volume. Pot life is about 27 minutes at 75 F on a gallon mix. Use it from 50 F to 100 F. Gravity feed covers about 0.0025 in to 0.125 in cracks. Do not inject cracks wider than 1/4 in without calling Dayton Superior. The 13.5 oz cartridge is listed separately. 3 gallon and 15 gallon units are not listed here.
| Property | Value |
|---|---|
| Manufacturer | Dayton Superior / Unitex |
| Product | Pro-Poxy 50 |
| Item | 140004 |
| This pack | 1 gallon unit |
| Mix | 2:1 by volume |
| Pot life | 27 min at 75 F, 1 gallon |
| Gel, 60 g | 49 min at 75 F |
| Use temp | 50 F to 100 F |
| Gravity cracks | 0.0025 in to 0.125 in |
| Max inject | 1/4 in without calling Dayton |
| Viscosity, 75 F | 280 cP |
| Sister pack | 13.5 oz cartridge listed separately |
Product documents: Unitex Pro-Poxy 50 Data Sheet (PDF)
What is this?
Unitex Pro-Poxy 50 in the 1 gallon unit, a low-viscosity epoxy for injecting fine cracks.
Mix?
2 parts A to 1 part B by volume. Mix at least 3 minutes.
How long to place?
About 27 minutes pot life at 75 F on a gallon mix.
Cartridge?
The 13.5 oz cartridge is listed separately.
Who makes it?
Unitex, a Dayton Superior product.
Please complete your information below to login.