Parcel Orders over $300 Ship Free.
Tremco TREMPRO Chem-X Pro White 10oz Cartridge
TREMPRO Chem-X Pro is a one-part, non-sagging hybrid polymer adhesive/sealant for bonding the substrates common in manufacturing, supplied in a white 300 mL (10.1 oz) cartridge. It is solvent and isocyanate free, low VOC and low odor, and works as both an adhesive and a sealant.
- Movement capability of +/- 25%
- Bonds metals, plastic, wood, foam, vinyl and drywall
- Apply between 41°F (5°C) and 95°F (35°C)
$9.51
Availability:
Out of stock
Tremco TREMPRO Chem-X Pro White 10oz Cartridge
Tremco TREMPRO Chem-X Pro is a single-component, multi-purpose, non-sagging hybrid polymer adhesive/sealant intended to bond the variety of substrates found in manufacturing. It is solvent and isocyanate free, resists weathering, and has both adhesive and sealant capabilities, with strong adhesion and flexibility once fully cured. Typical uses include vehicles, RVs, cargo trailers, semi-trailers and truck bodies, steel tanks, HVAC units, boats, metal buildings, modular construction and cabinets. It goes on with conventional caulking or pressure equipment, skins in 20 – 25 minutes, and can be painted after 24 hours. Apply it only between 41°F (5°C) and 95°F (35°C), and test adhesion on the actual materials before use.
Key Features
- Hybrid polymer adhesive/sealant; solvent and isocyanate free
- Low VOC and low odor
- Movement capability of +/- 25%; Shore A hardness 60
- Green strength while curing and material strength once cured
- ASTM E84 flame spread index 0 and smoke development 0
Applications
- Vehicles, RVs, cargo trailers, semi-trailers and truck bodies
- Steel tanks, HVAC units and boats
- Metal buildings, modular construction and cabinets
- Bonding metals, plastic, wood, foam, vinyl and drywall
Technical Specifications
| Property | Value |
|---|---|
| Type | One-part, non-sagging hybrid polymer adhesive/sealant |
| Color | White |
| Movement capability | +/- 25% |
| Hardness (Shore A) | 60 |
| Skin time (ASTM C679) | 20 – 25 minutes |
| Tear strength (ASTM D624) | 93 lbf/in |
| Lap shear (ASTM C961) | 280 psi |
| Surface burning (ASTM E84) | Flame spread index 0; smoke development 0 |
| Service temperature (ref. ISO 4663) | -40°F (-40°C) to 212°F (100°C) |
| Application temperature | 41°F (5°C) to 95°F (35°C); optimum 59°F (15°C) to 77°F (25°C) |
| Paintable | After 24 hours, or 3 days with relatively inflexible paint |
| Shelf life | 12 months minimum stored below 95°F (35°C) |
| Pack | 300 mL (10.1 oz) cartridge |
| Part number | 833WHITA312 |
Product documents: Tremco TREMPRO Chem-X Pro Data Sheet (PDF)
Frequently Asked Questions
What can TREMPRO Chem-X Pro bond?
Typical substrates include metals, plastic, wood, foam, vinyl and drywall. Typical applications include vehicles, RVs, cargo trailers, semi-trailers, truck bodies, steel tanks, HVAC units, boats, metal buildings, modular construction and cabinets. Tremco recommends adhesion testing before use.
Does it need a primer?
It typically adheres to common construction substrates without primers. Finishes such as Kynar and anodized aluminum vary, so Tremco recommends application-specific testing on the actual materials to confirm whether a primer is needed and how to clean and prepare them.
How should surfaces be prepared?
Surfaces must be free of oil, grease, wax, dust, corrosion, moisture or anything that may interfere with adhesion. A dry rag or brush is recommended for dust and dirt. Do not use Xylol or MEK unless the surface can dry before application; the sealant will not adhere properly to a substrate wet with solvent.
What temperatures can it be applied in?
Do not apply below 41°F (5°C) or above 95°F (35°C). The optimum temperature for substrate and sealant is 59°F (15°C) to 77°F (25°C). Once cured, the service temperature range is -40°F (-40°C) to 212°F (100°C).
Can it be painted?
Yes, after 24 hours, or after 3 days with a relatively inflexible paint. Any latex and most oil-based paints are fine, and best results come from priming the sealant with latex enamel. Some paints might crack in dynamic joints.
How is it tooled and cleaned up?
Do not use alcohol or alcohol-containing agents for tooling. Remove it from guns and tools before it cures; excess can be scraped off with solvents, observing the solvent maker's precautions. Cured material is removed by cutting or abrasion. Shelf life is 12 months minimum stored below 95°F (35°C).
Please complete your information below to login.