Parcel Orders over $300 Ship Free.
Tremco Dymonic 100 Aluminum Stone 10oz Cartridge
Dymonic 100 is a high-performance, high-movement, single-component, medium-modulus, low-VOC, UV-stable, non-sag polyurethane sealant. Typical applications include expansion and control joints, precast concrete panel joints, perimeter caulking.
- Low-VOC
- High Adhesion at Full Cure
- Jet Fuel Resistant
$7.50
Availability:
In stock
( 196 Available )
Free Shipping for orders over $300
Tremco Dymonic 100 Aluminum Stone 10oz Cartridge
Tremco Dymonic 100 Aluminum Stone is a single-component, medium-modulus, non-sag polyurethane sealant made for high-movement construction joints. It delivers a durable, flexible seal for expansion joints, perimeter caulking, precast panel joints, and flashing details while maintaining strong adhesion after cure. Dymonic 100 is also designed to adhere to damp or green concrete without outgassing and is suitable for water immersion applications.
Key Features
- Single-component, medium-modulus, non-sag polyurethane sealant.
- High movement capability of plus 100 percent / minus 50 percent in typical field conditions.
- Adheres to damp or green concrete without outgassing.
- UV-stable formula resists cracking, crazing, and yellowing.
- Low-VOC and jet fuel-resistant.
- Paintable after cure.
- Skin time of 2 to 3 hours and tack-free time of 6 to 8 hours.
- Compatible with select Tremco deck coatings, air barrier products, and below-grade waterproofing products.
Applications
- Expansion joints.
- Control joints.
- Precast concrete panel joints.
- Perimeter caulking at windows, doors, and panels.
- Aluminum, masonry, and vinyl siding joints.
- Rough opening flashing for window, door, and curtain wall applications.
- Water immersion applications.
- General high-movement commercial and industrial sealing work.
Technical Specifications
| Property | Value |
|---|---|
| Product Type | Single-component, medium-modulus, non-sag polyurethane sealant |
| Packaging | 10.1 oz (300 mL) cartridge |
| Color | Aluminum Stone |
| Hardness | 40 plus or minus 5 |
| Skin Time | 2 to 3 hours |
| Tack-Free Time | 6 to 8 hours at 73.4 degrees F and 50% RH |
| Adhesion to Concrete | 35 pli |
| Adhesion to Concrete After Immersion | 30 pli |
| Adhesion to Green Concrete | Greater than 25 pli |
| Adhesion to Damp Concrete | Greater than 20 pli |
| Movement Capability | ASTM C719 plus or minus 50 percent; modified plus 100 percent / minus 50 percent |
| Tensile Strength | 350 to 450 psi |
| Elongation | 800 to 900 percent |
| Modulus at 100% | 75 to 85 psi |
| Tear Strength | 65 to 75 psi |
| Service Temperature | -40 degrees F to 180 degrees F |
| Application Temperature | 40 degrees F to 100 degrees F |
| Standards | ASTM C920 Type S Grade NS Class 50 Use NT, T, M, A, O, I; TT-S-00230C Class A Type II; CAN/CGSB-19.13-M87; ICC Section R703.8 Flashing; AAMA 714-15; NFPA 285 Listed Component |
FAQs
What is Tremco Dymonic 100 used for?
It is used for expansion joints, control joints, perimeter caulking, precast panel joints, siding joints, and flashing details around windows, doors, and curtain walls.
Can Dymonic 100 be applied to damp or green concrete?
Yes. It is specifically formulated to adhere to damp or green concrete without outgassing.
Is Dymonic 100 suitable for water immersion?
Yes. The product data sheet states that it is suitable for water immersion applications, but it is not recommended for chlorinated, potable, heavy, or waste water.
How much movement can Dymonic 100 handle?
It has ASTM C719 movement capability of plus or minus 50 percent and a modified movement capability of plus 100 percent / minus 50 percent in typical field conditions.
Can Dymonic 100 be painted?
Yes. It is paintable, although Tremco notes that paint adhesion and compatibility can vary depending on the paint system used.
What package size is this product?
This page is for the 10.1 oz cartridge in Aluminum Stone.
Please complete your information below to login.