Parcel Orders over $300 Ship Free.
Sylmasta Industrial Metal Rapid 5 Minute Epoxy Paste 4x500g
Sylmasta Industrial Metal Rapid 5 Minute is a metal-filled epoxy paste (PSF) for metal, wood, and most plastics on pumps, valves, castings, low-pressure pipes, tanks, and automotive bodywork. Tool it onto prepared surfaces so maintenance crews can rebuild worn sections, fill holes and cracks, and seal against corrosion and chemical attack on time-critical plant repairs.
- Seals pumps, valves, metal castings, low-pressure pipes, and tanks against corrosion and chemical attack.
- Keeps holes, cracks, and pitting rebuilt with a machinable metal-platelet repair on urgent jobs.
- Stays thixotropic with a light consistency and little sag for vertical and complex plant work.
$302.20
Availability:
In stock
( 24 Available )
Sylmasta Industrial Metal Rapid 5 Minute Epoxy Paste - 4x500g
Sylmasta Industrial Metal Rapid 5 Minute is a metal-filled epoxy paste supplied as a 4 x 500g pack (PSF-4x500g) for hand-tool application on metal, wood, and most plastics. Maintenance crews use it on pumps, valves, metal castings, low-pressure pipes, tanks, and automotive bodywork to rebuild damage quickly and seal against corrosion and chemical attack.
Looking for another Industrial Metal paste?
Key Features
- Seals pumps, valves, metal castings, low-pressure pipes, and tanks against corrosion and chemical attack.
- Keeps holes, cracks, and pitting filled so worn pumps, valves, and equipment can return to service sooner.
- Forms a smoother machinable finish than regular epoxy pastes thanks to corrosion-resistant metal platelets.
- Rebuilds worn equipment and restores surface profile when a fast-setting Industrial Metal paste is required.
- Tool-applies with a light consistency and little sag, and is virtually odourless for indoor plant work.
- Stays thixotropic so vertical and complex plant repairs hold shape without sag during the rapid set.
Technical Specifications
| Property | Value |
|---|---|
| Product code | PSF-4x500g |
| Pack size | 4 x 500g |
| Mix ratio (weight) | 1:1 |
| Mix ratio (volume) | 1:1 |
| Gel time | 5 minutes |
| Functional cure | 60 minutes |
| Full cure | 24 hours |
| Max service temperature | 95°C |
| Density | 1.6 g/cm³ |
| Shelf life | 24 months at 24°C |
Product documents: Sylmasta Industrial 5 Minute Metal Technical Data Sheet
Frequently Asked Questions
What fast repair jobs is Sylmasta Industrial Metal Rapid 5 Minute built for?
Sylmasta Industrial Metal Rapid 5 Minute (PSF) is a metal-filled, fast-setting epoxy paste that rebuilds worn and damaged surfaces and seals against corrosion and chemical attack. Plant and maintenance teams tool it onto pumps, valves, metal castings, low-pressure pipes, tanks, and automotive bodywork, fill holes, cracks, and pitting, and restore surface profile when a rapid-set Industrial Metal paste is needed. It is effective on metal, wood, and most plastics.
How is Sylmasta Industrial Metal Rapid 5 Minute mixed and tooled on?
Surfaces must be dry and free from grease, cleaned, and roughened for adhesion, with a defined 3-5 mm profile so the paste locks in. Mix 1 part resin to 1 part hardener by weight or volume; whole kits ship Part A and Part B in the correct ratio. Mix until streak free and uniform, then spread with a putty knife, pressing firmly for full contact and to avoid trapped air. Bridge large gaps with fibreglass, sheet metal, or wire mesh. Gel time is 5 minutes; functional cure in 60 minutes; full cure in 24 hours. Apply between 13°C and 52°C. Wear eye protection and rubber or plastic coated gloves, and follow the Safety Data Sheet.
Can Sylmasta Industrial Metal Rapid 5 Minute cure underwater or on wet surfaces?
No. Sylmasta published product copy states Industrial Metal Rapid 5 Minute does not cure underwater or on wet surfaces. For moisture-tolerant wet-surface and underwater metal-paste repairs, use the live sister listing Sylmasta Industrial Metal (PST-4x500g), which the Industrial Metal TDS describes as moisture tolerant and able to cure underwater.
How does Sylmasta Industrial Metal Rapid 5 Minute differ from standard Industrial Metal?
Rapid 5 Minute (PSF) is the fast metal-filled paste with a 5-minute gel time, 1:1 mix, functional cure in 60 minutes, and maximum service temperature 95°C. Standard Industrial Metal (PST) offers a 60-minute gel time, 2:1 mix, wet-surface and underwater cure, and maximum service temperature 130°C. This listing is PSF-4x500g only; the live standard sister pack is linked above when you need the longer working paste.
What hardness, strength, and service temperature does cured Sylmasta Industrial Metal Rapid 5 Minute reach?
Per the Industrial 5 Minute Metal TDS, Shore D hardness is 80+ at full cure (24 hours). Typical strengths are tensile 20 MPa, compressive 72 MPa, flexural 20 MPa, and lap shear on steel 14 MPa. Density is typically 1.6 g/cm3 with less than 1% shrinkage and 100% non-volatile content. Maximum service temperature is 95°C. For pipework above 95°C, Sylmasta points users to Titanium Supergrade HT paste (listed separately on this storefront).
What pack is available for Sylmasta Industrial Metal Rapid 5 Minute on this storefront, and how should it be stored?
This listing is PSF-4x500g: Industrial 5 Minute Metal in a 4 x 500g pack. The live sister paste on this storefront is standard Industrial Metal PST-4x500g. Sister sizes (500g, 2kg, 5kg, 50kg) appear on the TDS but are not currently live here. Store out of direct sunlight in dry, frost-free conditions between 15°C and 25°C for a two-year shelf life from manufacture (minimum shelf life 24 months at 24°C per Technical Data).
Please complete your information below to login.