Parcel Orders over $300 Ship Free.
Sika SikaSet Waterplug 5 Gallon Pail
SikaSet Waterplug is a one-component fast-setting hydraulic water-stop mortar in a 5 gallon pail for static cracks and holes with running water. It expands as it sets and is NSF/ANSI 61 certified for potable water contact.
- Stops running water through static cracks and holes
- Expands while setting to lock under water pressure
- NSF/ANSI 61 certified for potable water contact
$123.62
SikaSet Waterplug
SikaSet Waterplug is a one-component, Portland-cement-based hydraulic repair mortar that instantly stops running water through static holes or cracks in concrete and masonry. This 5 gallon pail (part 801147) expands as it sets to lock in place under constant water pressure, reaches approximately 1,800 psi compressive in 20 to 120 minutes, and builds to approximately 5,500 psi at 28 days. It is certified to NSF/ANSI 61 for potable water contact and can be topcoated in approximately 15 minutes.
Key Features
- One-component Portland-cement hydraulic water-stop repair mortar
- Expands while setting to lock under constant water pressure
- Sets in approximately 3 to 5 minutes under normal conditions
- Compressive strength approximately 1,800 psi in 20 to 120 minutes and 5,500 psi at 28 days
- Ready to topcoat in approximately 15 minutes with an appropriate product
- Certified to NSF/ANSI 61 for potable water contact
Applications
- Stops running water in static cracks and holes in concrete and masonry
- Works on basements, foundations, retaining walls, and sewers
- Vertical, overhead, or horizontal placement above or below grade
- Anchors vertical bolts in immersion service
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Sika |
| Product | SikaSet Waterplug |
| Part no. | 801147 |
| Unit | 5 gallon pail |
| Chemistry | One-component cementitious hydraulic mortar |
| Set time | Approximately 3 to 5 minutes |
| Compressive 20-120 min | Approximately 1,800 psi |
| Compressive 28 day | Approximately 5,500 psi |
| Flexural 28 day | Approximately 1,500 psi |
| Topcoat ready | Approximately 15 minutes |
| Listing | NSF/ANSI 61 potable water |
Product documents: SikaSet Waterplug Product Data Sheet (PDF)
Frequently Asked Questions
What water problems does SikaSet Waterplug stop?
Running water or moisture seepage through non-moving static cracks and holes in concrete and masonry, including immersion service.
What set time should crews plan for SikaSet Waterplug under normal conditions?
Approximately 3 to 5 minutes when material and mix water are near 70 F. Hot conditions quicken set; cold conditions retard it.
What compressive strength does cured SikaSet Waterplug reach?
Approximately 1,800 psi between 20 and 120 minutes, 4,000 psi at 1 day, 5,000 psi at 7 days, and 5,500 psi at 28 days.
What potable-water listing applies to SikaSet Waterplug?
It is certified to NSF/ANSI Standard 61 for potable water contact.
What topcoat window applies after SikaSet Waterplug placement?
Ready to topcoat in approximately 15 minutes with an appropriate product to minimize downtime.
What size is the SikaSet Waterplug pail on this page?
This page is the 5 gallon pail, part 801147.
Please complete your information below to login.