Parcel Orders over $300 Ship Free.
Sika Sikagard 62 Epoxy Coating Gray 4 Gallon 91032
Sikagard-62 is a high-build solvent-free colored epoxy coating in a Gray 4 gallon unit for containment linings and protective floors. It mixes 1:1 by volume and covers approximately 150 to 250 sf/gal with strong abrasion and chemical resistance.
- Solvent-free high-build epoxy with 1:1 mix ratio
- Approximately 150 to 250 sf/gal coverage by substrate
- Gray is ANSI/NSF 61 potable-water compliant
$515.01
Sikagard-62
Sikagard-62 is a high-build, solvent-free, colored epoxy coating for corrosion-resistant protection, secondary containment linings, and seamless flooring on prepared concrete and steel. This Gray 4 gallon unit (part 91032) mixes 1:1 by volume, covers approximately 150 to 250 sf/gal depending on substrate, and reaches approximately 5,400 psi tensile strength at 14 days. Pot life is approximately 35 to 40 minutes, tack-free in approximately 4 hours, and Gray is ANSI/NSF 61 potable-water compliant for qualified immersion service after full cure.
Key Features
- High-build solvent-free colored epoxy protective coating
- Convenient A:B = 1:1 mixing ratio by volume
- Approximately 5,400 psi tensile strength at 14 days
- Reaches approximately 150 to 250 sf/gal by substrate condition
- Pot life approximately 35 to 40 minutes; tack-free approximately 4 hours
- Gray is ANSI/NSF 61 potable water compliant
Applications
- High-build corrosion-resistant protective coating
- Protective lining for secondary containment structures
- Works for seamless flooring systems on prepared concrete
- Prepared steel surfaces needing chemical and abrasion resistance
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Sika |
| Product | Sikagard-62 |
| Part no. | 91032 |
| Unit | 4 gallon |
| Color | Gray |
| Chemistry | Solvent-free colored epoxy |
| Mix ratio | 1:1 by volume |
| Coverage | Approximately 150-250 sf/gal |
| Pot life | Approximately 35-40 min |
| Tack-free | Approximately 4 hours |
| Tensile at 14 days | Approximately 5,400 psi |
| Immersion cure | Minimum 3 days |
Product documents: Sikagard-62 Product Data Sheet (PDF)
Frequently Asked Questions
What mix ratio does Sikagard-62 use?
Component A to Component B is 1:1 by volume. Pre-mix each side, then blend for 3 minutes to a uniform color.
What coverage should a crew plan for Sikagard-62?
Approximately 150 to 250 sf/gal depending on substrate condition. Two coats are recommended.
What pot life and tack-free times apply to Sikagard-62?
Pot life is approximately 35 to 40 minutes (60 gram mass). Tack-free time is approximately 4 hours.
What potable-water listing does Sikagard-62 Gray carry?
Gray is ANSI/NSF 61 potable water compliant. Immersion and chemical exposure need a minimum 3-day cure.
What substrates take Sikagard-62?
Prepared concrete and blast-cleaned steel for protective coating, secondary containment, and seamless flooring.
What size is the Sikagard-62 unit on this page?
This page is the Gray 4 gallon unit, part 91032.
Please complete your information below to login.