Parcel Orders over $300 Ship Free.
Sika SikaEmaco 1060 50lb Bag
SikaEmaco 1060 is a one-component, shrinkage compensated, very rapid setting, cement based mortar. It is designed for repairing horizontal concrete surfaces where high early strength gain is required.
- Very rapid-setting - Open to vehicular traffic in 1 hour
- Low residual moisture - Coat in as little as 4 hours
- Extend up to 100% by weight
$27.11
Ask About Project Pricing!
SKU
20193
SikaEmaco 1060 – Very Rapid-Setting Concrete Repair Mortar (50 lb Bag)
SikaEmaco 1060 is a high-performance, shrinkage-compensated, cement-based mortar designed for fast structural repairs to horizontal concrete surfaces. Engineered for rapid-setting and high early strength, it enables reopening to vehicle traffic in just one hour. With low permeability, excellent freeze/thaw durability, and the ability to be coated in as little as four hours, it’s ideal for time-sensitive repairs. This single-component mortar requires no additional additives, can be extended up to 100% for deeper patches, and is suitable for both interior and exterior applications where speed and durability are critical.
Key Features:
- Rapid-setting – supports vehicular traffic in 1 hour
- High early compressive strength: 5,000 psi in 1 day
- Shrinkage-compensated to reduce cracking and stress
- Low permeability for reduced chloride intrusion
- Freeze/thaw and deicing salt resistant
- Coatable in as little as 4 hours due to low residual moisture
- Extensible with aggregate for large or deep repairs
- Suitable for interior and exterior horizontal applications
Applications:
- Rapid repair of concrete floors and decks
- Partial and full-depth horizontal concrete patching
- Industrial and commercial pavement repair
- Airport runways and loading docks
- Bridge decks and parking structures
Technical Specifications:
| Property | Value |
|---|---|
| Compressive Strength | 1 hr: 2,000 psi, 1 day: 5,000 psi, 28 days: 8,000 psi |
| Flexural Strength | 1 day: 700 psi, 28 days: 850 psi |
| Bond Strength (Slant Shear) | 1 day: 2,300 psi, 28 days: 2,600 psi (ASTM C882, modified) |
| Tensile Strength | 1 day: 400 psi, 28 days: 850 psi |
| Modulus of Elasticity | 4.4 x 10⁶ psi |
| Thermal Expansion | 7.0 x 10⁻⁶ in/in/°F |
| Set Time (Initial / Final) | 16 min / 28 min @ 72°F |
| Coverage | 0.43 ft³ per 50 lb bag (up to 0.77 ft³ when extended 100%) |
| Rapid Chloride Permeability | Less than 300 coulombs |
| Freeze/Thaw Resistance | 100% RDM at 300 cycles |
Frequently Asked Questions:
Can SikaEmaco 1060 be coated?
Yes, due to its low residual moisture, coatings can typically be applied within 4 hours. Always consult your coating manufacturer for compatibility.
What is the minimum application thickness?
The minimum application thickness is ½ inch. It can be applied at ¼ inch for deck membranes on pedestrian balconies.
Does it require wet curing?
No, curing can be done using curing compounds, water misting, or polyethylene sheeting for at least 2 days.
| Brand | Sika |
|---|---|
| Manufacturer | Sika |
