Parcel Orders over $300 Ship Free.
Pecora AC-20 Tru-White 10oz Cartridge
Pecora AC-20 Tru-White 10oz cartridge is a one-part non-sag acrylic latex with silicone additive for architectural joints with only nominal movement. Latex and oil paints go over the Tru-White bead in 30 to 45 minutes.
- Tru-White match for bright-white trim, fixtures, and interiors
- Keep the bead dry 24 hours; hold outdoor work when rain is imminent
- Nominal movement ±7.5%; not precast expansion beyond that range
$5.20
Availability:
Out of stock
Pecora AC-20 Tru-White - 10oz Cartridge
Pecora AC-20 is a one-part non-sag acrylic latex with silicone additive for general-purpose interior and exterior joints where only nominal movement is anticipated. It is used on architectural joints around interior concrete, hollow-core planks, window and door frames, siding, sheetrock, fixtures, and tile grout. It is placed as a Tru-White 10oz cartridge when the bead needs to match bright-white trim, fixtures, and painted interiors. Paint-ready in 30 to 45 minutes, applied above 40 F, and kept dry for 24 hours after placement.
Looking for another color?
Key Features
- One-part non-sag acrylic latex with silicone additive
- Tru-White 10oz cartridge for bright-white trim and fixtures
- Paint latex or oil in 30 to 45 minutes
- Apply above 40 F; keep dry 24 hours
- Joints 1/4 to 3/4 in wide, 1/4 to 3/8 in deep
- Nominal movement architectural joints
Applications
- Interior concrete joints and hollow-core ceiling and floor planks.
- Window and door frames.
- Vinyl, aluminum, steel, and plywood siding.
- Sheetrock, baseboards, bathroom and kitchen fixtures.
- Marble and ceramic tile grout; mortar-seam repair.
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | One-part non-sag pure acrylic latex with silicone additive |
| Movement | ±7.5% (15% total) |
| Standard | ASTM C834 latex sealants |
| VOC | 31 g/L (ASTM D3960) |
| Paint window | 30 to 45 min with latex or oil paints |
| Application temperature | Above 40 F |
| Joint size | Width 1/4 to 3/4 in; depth 1/4 to 3/8 in |
| Pack | 10.1 fl oz (0.300 L) cartridge |
| Color | Tru-White |
| Water protection | Keep dry 24 hours after placement |
Product documents: Pecora AC-20 +Silicone Specification Data Sheet PEC 116 05/25 (PDF)
Frequently Asked Questions
What work is Pecora AC-20 Tru-White used on?
Yes. Pecora AC-20 Tru-White 10oz Cartridge is used on architectural joints with only nominal movement around frames, siding, sheetrock, fixtures, interior concrete, and tile grout.
What size is Pecora AC-20?
Pecora AC-20 is a 10.1 fl oz cartridge. This listing is the Tru-White 10oz unit.
What thermal movement is listed for Pecora AC-20 Tru-White?
Movement of ±7.5% (15% total) is listed for Pecora AC-20 Tru-White 10oz Cartridge; engineered expansion and precast joints above that range are a different product.
What joint size is listed for Pecora AC-20 Tru-White?
Joint width 1/4 to 3/4 inch and depth 1/4 to 3/8 inch are listed for Pecora AC-20 Tru-White 10oz Cartridge.
What paint timing is listed for Pecora AC-20 Tru-White?
A 30 to 45 minute paint window with latex or oil paints is listed for Pecora AC-20 Tru-White 10oz Cartridge.
What movement limit is listed for Pecora AC-20 Tru-White?
Engineered expansion and interior-exterior precast panel joints greater than ±7.5% thermal movement are outside the listed range for Pecora AC-20 Tru-White 10oz Cartridge.
Please complete your information below to login.