Parcel Orders over $300 Ship Free.
Links
Toggle Nav
Advanced Search

CALL US NOW

888-809-2365

My Cart
Menu
Account
Settings
Currency
USD
main product photo

Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 Case 6

Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 is a rapid-setting two-component hydrophobic polyurethane expanding foam as a 1500 ml dual-cartridge, case of 6.

  • Installation and service 38-100 F on SPSEXP-1
  • Typical expansion 7:1; compression 115 psi
  • Set time 4-6 mins after 65 secs potlife
$434.74
Availability: Out of stock
Add To Wishlist Add to Compare
Email

Metzger McGuire Spal-Pro Stabilizer Foam - MMSPEXPC-1500-6 Case 6

Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 is a rapid-setting two-component hydrophobic polyurethane expanding foam. It is used to correct rocking slabs by injection into underslab voids caused by slab curl. It is placed as a 1500 ml dual-cartridge, case of 6 under MPN MMSPEXPC-1500-6. SPSEXP-1 lists a 65 secs potlife, a 4-6 mins set, typical expansion 7:1, and compression 115 psi at density 8.0 pcf.

Key Features

  • Hydrophobic polyurethane expanding foam, MPN MMSPEXPC-1500-6
  • 1500 ml dual-cartridge, case of 6
  • Typical expansion 7:1; compression 115 psi on SPSEXP-1
  • Weight stays off injected slabs a minimum of 30 minutes at ambient
  • Full traffic about 40 minutes; deflection reduced within 45 minutes
  • Not designed for subgrade below 38 F on SPSEXP-1

Applications

  • Correction of deflecting slabs from subgrade or sub-base loss.
  • Underslab injection along rocking industrial floor joints.
  • Closed-cell structural foam pad under floor panels.
  • Jobs that take MPN MMSPEXPC-1500-6 as a case of 6 dual-cartridges.

Technical Specifications

Property Value
Mix ratio 1:1 by volume
Reaction/potlife 65 secs
Set time 4-6 mins
Density 8.0 pcf
Expansion typical 7:1 (six to eight times)
Compression 115 psi (ASTM 1621)
Tensile 165 lbs (ASTM 638)
Color opaque gray
Installation and service 38-100 F
Packaging 1500 ml (750:750) dual-cartridge, case of 6, MPN MMSPEXPC-1500-6

Product documents: Spal-Pro Stabilizer EXP Technical Data Sheet SPSEXP-1 Revised 09/15 (PDF) | Spal-Pro Stabilizer EXP Safety Data Sheet May 14, 2018 (PDF)

Frequently Asked Questions

What size is Metzger McGuire Spal-Pro Stabilizer Foam?
Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 is a 1500 ml dual-cartridge, case of 6 on the SPSEXP-1 datasheet.

What jobs need Metzger McGuire Spal-Pro Stabilizer Foam?
Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 is used to correct rocking slabs by injection into underslab voids on the SPSEXP-1 datasheet.

What subgrade temperature does Metzger McGuire Spal-Pro Stabilizer Foam need?
Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 is not designed for subgrade below 38 F, and installation and service are 38-100 F on the SPSEXP-1 datasheet.

What traffic wait does Metzger McGuire Spal-Pro Stabilizer Foam have?
SPSEXP-1 keeps weight off injected slabs a minimum of 30 minutes at ambient for Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6, with full traffic about 40 minutes.

What set time does Metzger McGuire Spal-Pro Stabilizer Foam have?
Set time of Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 is 4-6 mins after the 65 secs potlife on the SPSEXP-1 datasheet.

What compression does Metzger McGuire Spal-Pro Stabilizer Foam have?
Compression of Metzger McGuire Spal-Pro Stabilizer Foam MMSPEXPC-1500-6 is 115 psi on ASTM 1621, with tensile 165 lbs on ASTM 638, on the SPSEXP-1 datasheet.