Parcel Orders over $300 Ship Free.
Metzger McGuire Spal-Pro SPF 1 Gal
Metzger McGuire Spal-Pro SPF is a water-based one-component stain-prevention film for epoxy joint-filler overfill as a 1 gallon unit on concrete and tile.
- Coverage is about 700 sf/gallon on steel-troweled industrial floors
- The film is fully tack-free before joint filler is installed
- Application and storage stay at 40-90 F
$50.43
Drop Shipped
Metzger McGuire Spal-Pro SPF - 1 Gal
Metzger McGuire Spal-Pro SPF is a water-based one-component stain-prevention film for epoxy joint-filler overfill. It is used on conventional, colored, stained, and tiled concrete surfaces beside the joint before epoxy filler is installed. It is placed as a 1 gallon unit that dries to a thin film, covers approximately 700 sf/gallon on steel-troweled industrial floors, and must be fully tack-free before fill. Application and storage on the SPF/SPF-P-1 sheet are 40-90 F, and the film stays out of the joint so filler adhesion is not compromised.
Key Features
- The water-based film keeps epoxy joint-filler overfill from staining the slab.
- A foam roller or high-pressure spray places the film beside the joint.
- Cleanup is a water rinse after the overfill is shaved.
- One coat is generally adequate; two coats may be needed after a floor test.
- The chemistry meets USDA/FDA guidelines and contains no VOCs.
- The film is not suitable for freezers because the chemistry is water-based.
Applications
- The film seals conventional, colored, and stained concrete beside joints before epoxy fill.
- Tile surfaces stay protected from epoxy overfill stain.
- Same-day epoxy joint filling proceeds after the film is fully tack-free.
- Steel-troweled industrial floors keep overfill stain off the slab.
Technical Specifications
| Property | Value |
|---|---|
| Product Name | SPAL-PRO SPF (For Epoxies) |
| Coverage Rates | approximately 700 sf/gallon on steel-troweled industrial floors |
| Lineal coverage, 2 in film | 3,500-4,500 LF/gal |
| Lineal coverage, 3 in film | 2,500-3,500 LF/gal |
| Application temperature | 40-90 F on a clean dry surface |
| Storage | 40 F-90 F; prevent freezing |
| Tack-free | fully tack-free before installing joint filler; same-day as filler |
| USDA/FDA | meets USDA/FDA safety guidelines; contains no VOCs |
| Cleanup | water |
| Packaging | 1 gallon unit |
Product documents: Spal-Pro SPF/SPF-P Technical Data Sheet SPF/SPF-P-1 REVISED 06/15 (PDF) | Spal-Pro SPF Safety Data Sheet 02/2025 (PDF)
Frequently Asked Questions
What work is Metzger McGuire Spal-Pro SPF used on?
This water-based film keeps epoxy joint-filler overfill from staining conventional, colored, stained, and tiled concrete.
What size is Metzger McGuire Spal-Pro SPF?
The pack is a 1 gallon unit of water-based stain-prevention film for epoxy fillers.
What coverage is on Metzger McGuire Spal-Pro SPF?
Coverage is about 700 sf/gallon on steel-troweled industrial floors, or 3,500-4,500 LF/gal at a 2 in film width.
What application temperature is on Metzger McGuire Spal-Pro SPF?
The film is stored and applied at 40-90 F on a clean dry surface, and units must stay from freezing.
What tack-free rule is on Metzger McGuire Spal-Pro SPF?
The film is placed the same day as the filler and must be fully tack-free before the joint is filled.
What film placement is on Metzger McGuire Spal-Pro SPF?
The film stays on the slab beside the joint and out of the joint so filler adhesion is not compromised.
Please complete your information below to login.