Parcel Orders over $300 Ship Free.
Durajoint Ultra-Tite Waterstop 20oz Sausage
Durajoint Ultra-Tite is a single-component hydrophilic gunable waterstop for cast-in-place and precast joints, and as adhesive for Durajoint strip waterstops.
- Zero-slump gun grade on vertical and overhead faces
- Skins in about 60 minutes at 77°F
- Service from -40°F to 220°F
$42.00
Availability:
Out of stock
Durajoint Ultra-Tite Hydrophilic Gunable Waterstop
Durajoint Ultra-Tite is a single-component, moisture-swelling hydrophilic sealant used as a standalone waterstop in cast-in-place and precast joints, and as adhesive for Durajoint strip waterstops. The gun-grade, zero-slump paste skins in about 60 minutes at 77°F and stays in service from -40°F to 220°F. Use it on cold joints, irregular faces, pipe penetrations, tunnels, manholes, culverts, and foundation joints.
Key Features
- Moisture-swelling hydrophilic sealant for non-moving joints
- Zero-slump gun grade on vertical, overhead, and irregular faces
- Standalone waterstop or adhesive for Durajoint strip waterstops
- Skins in about 60 minutes at 77°F, 50% RH
- Stays in service from -40°F to 220°F
- Works pipe penetrations, cold joints, and rough concrete
Applications
- Cast-in-place and precast construction joints
- Tunnels, vent shafts, dams, and manholes
- Box culverts, containment, and foundation joints
- Pipe and circular penetrations
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | DCA Construction Products (Durajoint) |
| Product | Ultra-Tite |
| Type | Single-component hydrophilic gunable waterstop |
| Packaging | 20.2 oz sausage; 20/carton |
| Skin time | 60 min at 77°F, 50% RH |
| Cure rate | 1/8 in bead per 40 hours at 77°F, 50% RH |
| Gun grade | Zero slump |
| Service temperature | -40 to 220°F |
| Application temperature | 40 to 130°F (best 40-70°F) |
| Shear strength | 188 psi |
| Adhesion to primed concrete | 30 pli |
| Shelf life | 12 months from manufacture, dry storage |
Product documents: Durajoint Waterstop Master Specifications (PDF)
Frequently Asked Questions
What is Ultra-Tite?
A single-component, moisture-swelling hydrophilic sealant used as a standalone waterstop in cast-in-place and precast joints, and as adhesive for Durajoint strip waterstops.
What pack is this page?
The 20.2 oz sausage. DCA also publishes a 10.3 oz tube; that pack is not listed here.
Where is it used?
Cold joints, irregular faces, pipe penetrations, tunnels, manholes, culverts, containment, and foundation joints.
How fast does it skin?
About 60 minutes at 77°F and 50% RH. Cure is about 1/8 in of bead per 40 hours in those conditions.
Please complete your information below to login.