Parcel Orders over $300 Ship Free.
Dayton Superior T3A 1inx12in Single Edge Pickup Insert HDGALV
Dayton Superior T3A is a single-edge end pickup insert, 1 in by 12 in, hot-dip galvanized, for lifting precast and tilt-up panel ends. The tension loop holds the coil-bolt lift at the panel edge so the panel can be picked on one face.
- Single-edge insert is used on panel ends
- Hot-dip galvanized body is used in exposed or wet service
- Tension loop holds the coil-bolt lift
$36.29
Availability:
Out of stock
Dayton Superior T3A End Pickup Insert
Dayton Superior T3A is a single-edge end pickup insert, 1 in by 12 in, hot-dip galvanized, for lifting precast and tilt-up panel ends. The tension loop holds the coil-bolt lift at the panel edge so the panel can be picked on one face. Safe working loads are based on a 1/2 in face setback in 3,000 psi concrete. The 1 in coil matches 1 in coil-bolt hardware.
Key Features
- Single-edge end pickup insert is used on precast and tilt-up panel ends
- Hot-dip galvanized body is used in exposed or wet service
- Tension loop holds the coil-bolt lift
- Safe working loads are based on a 1/2 in face setback
- 1 in coil diameter matches 1 in coil-bolt hardware
Applications
- Tilt-up panel ends that need a single-edge pickup
- Precast panel ends that need a hot-dip galvanized insert
- Edge lifts that need a 1 in coil-bolt connection
Technical Specifications
| Property | Value |
|---|---|
| Type | Single-edge end pickup insert |
| Size | 1 in coil by 12 in body |
| Finish | Hot-dip galvanized |
| Panel use | 5 in to 8 in panels, 1 in single |
| Tension SWL 5 in panel | 3,000 lbs |
| Tension SWL 8 in panel | 4,500 lbs |
| Shear SWL 5 in panel | 1,350 lbs |
| Safety factor | Approximately 4 to 1 in 3,000 psi concrete |
| Setback | 1/2 in from face |
| Hardware | Matching 1 in coil bolt |
Product documents: Dayton Superior Precast Handbook (PDF)
Frequently Asked Questions
What panels is Dayton Superior T3A End Pickup Insert used on?
Precast and tilt-up panel ends that need a single-edge lift.
What size is Dayton Superior T3A End Pickup Insert?
The pack is a 1 in by 12 in hot-dip galvanized insert.
What lift does Dayton Superior T3A End Pickup Insert hold?
A directional end lift on a 1 in coil bolt.
What safe working load does Dayton Superior T3A End Pickup Insert have on a 5 in panel?
3,000 lbs tension and 1,350 lbs shear at a 1/2 in face setback in 3,000 psi concrete.
What finish is Dayton Superior T3A End Pickup Insert?
Hot-dip galvanized.
What coil bolt does Dayton Superior T3A End Pickup Insert use?
A matching 1 in coil bolt.
Please complete your information below to login.