Dayton Superior Sure-Grip High Performance Grout

Sure-Grip High Performance Grout is a non-shrink, non-metallic cementitious grout with controlled positive expansion for base plates and machinery.

Dry pack, flowable, or fluid placement
High early strength for shorter downtime
Interior or exterior; DOT listed

$22.78

Details

Dayton Superior Sure-Grip High Performance Non-Shrink Grout, 50 lb Bag

Sure-Grip High Performance Grout is a non-shrink, non-metallic, non-corrosive cementitious grout with controlled positive expansion for high bearing area. Mix it dry pack, flowable, or fluid for base plates, precast, machinery, and dowels. Keep contact surfaces between 45 and 90°F before grouting and during cure. Interior or exterior placements with numerous DOT listings.

Key Features

Non-shrink cementitious grout with controlled positive expansion
Dry pack, flowable, or fluid consistency
High early strength for shorter downtime
Non-metallic and non-corrosive
Pourable and pumpable at a fluid mix
Interior or exterior; numerous DOT listings
NSF/ANSI/CAN 61 certified by WQA

Applications

Structural column base plates
Machinery, pump, and crane-rail bases
Precast and architectural components
Anchoring bolts, dowels, cables, and keyways

Technical Specifications

Property	Value
Chemistry	Non-shrink non-metallic cementitious grout
ASTM / CRD	ASTM C1107; CRD-C 621
Compressive, dry pack	10,500 psi at 1 day; 12,500 psi at 28 days (ASTM C109)
Compressive, flowable	6,000 psi at 1 day; 10,000 psi at 28 days
Compressive, fluid	4,500 psi at 1 day; 9,000 psi at 28 days
Height change (C1090)	0.07% at 1 day; 0.08% at 28 days; 0.00% shrinkage at 56 days
Set (fluid, C191)	Initial 5 hr 30 min; final 7 hr 50 min
Placement depth	Up to 3 in neat; extend with pea gravel over 3 in
Yield (flowable)	0.42 cu. ft. per 50 lb bag
Shelf life	12 months, dry storage
Packaging	50 lb bag

Product documents: Sure-Grip High Performance Grout Technical Data Sheet (PDF)

Frequently Asked Questions

What is Sure-Grip High Performance Grout?
It is a non-shrink, non-metallic cementitious grout with controlled positive expansion for base plates, machinery, precast, and similar high-bearing work. Mix dry pack, flowable, or fluid.

What strengths should I expect?
See the spec table. Dry pack, flowable, and fluid mixes have different published compressive values at 1 day and 28 days (ASTM C109).

Is it pourable and pumpable?
Yes, at a fluid mix with low water demand. Keep contact surfaces between 45 and 90°F before grouting and during cure.

Does it meet ASTM C1107?
Yes. ASTM C1107 and CRD-C 621. It is also WQA certified to NSF/ANSI/CAN 61.

More Information