Parcel Orders over $300 Ship Free.
Dayton Superior ProAnchor WeatherMax 28oz Cartridges Case 8 100942
Dayton Superior ProAnchor WeatherMax is a styrene-free vinylester anchoring adhesive in a 28 oz cartridge for threaded rod and rebar in cracked and uncracked concrete. Non-sag 10:1 mix holds in dry, water-saturated, and water-filled holes, including cold placements down to 14 F.
- Full cure is 45 minutes at 70 F
- 10:1 mix stays non-sag on overhead holes
- Styrene-free formula is used where low odor matters
$480.00
Availability:
Out of stock
Dayton Superior ProAnchor WeatherMax
Dayton Superior ProAnchor WeatherMax is a styrene-free vinylester anchoring adhesive in a 28 oz cartridge for threaded rod and rebar in cracked and uncracked concrete. Non-sag 10:1 mix holds in dry, water-saturated, and water-filled holes, including cold placements down to 14 F. Product code is 100942. Full cure is 45 minutes at 70 F. Working time is approximately 6 minutes at that temperature.
Key Features
- Styrene-free vinylester adhesive is used to anchor threaded rod and rebar
- Full cure is 45 minutes at 70 F
- Non-sag gel is used in dry, water-saturated, and water-filled holes
- Cold placements hold down to 14 F
- 10:1 mix stays non-sag on horizontal and overhead holes
Applications
- Threaded rod and rebar in cracked or uncracked concrete
- Cooler and freezer work that needs a 14 F placement
- Overhead and horizontal holes that need a non-sag gel
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | Styrene-free vinylester anchoring adhesive |
| Pack | 28 oz (825 ml) cartridge |
| Product code | 100942 |
| Mix ratio | 10:1 by volume |
| Working time at 70 F | Approximately 6 minutes |
| Full cure at 70 F | 45 minutes |
| Place temp | 14 F to 104 F |
| Concrete | Cracked and uncracked, dry to water-filled holes |
| ICC-ES | ESR-4554 / ACI 355.4 |
| ASTM C881 | Type I, II, IV, V Grade 3 Class A, B, C except gel time |
| Drinking water | NSF/ANSI/CAN 61 |
Product documents: Dayton Superior ProAnchor WeatherMax Data Sheet (PDF)
Frequently Asked Questions
What anchors is Dayton Superior ProAnchor WeatherMax used on?
Threaded rod and reinforcing bar in cracked or uncracked concrete. Vertical, horizontal, and overhead holes.
What cartridge size is Dayton Superior ProAnchor WeatherMax?
This listing is a 28 oz (825 ml) cartridge, code 100942. Mix ratio is 10:1.
What cure time does Dayton Superior ProAnchor WeatherMax have?
Full cure is 45 minutes at 70 F. Working time is approximately 6 minutes at that temperature.
What hole moisture does Dayton Superior ProAnchor WeatherMax allow?
Dry, water-saturated, and water-filled holes. Standing water is blown out before cleaning.
What place temperature does Dayton Superior ProAnchor WeatherMax have?
Place down to 14 F. Below 23 F, the cartridge is warmed to 70 F to 75 F first.
What working time does Dayton Superior ProAnchor WeatherMax have?
Approximately 6 minutes at 70 F.
Please complete your information below to login.