Parcel Orders over $300 Ship Free.
Dayton Superior Polyfast FS 50lb Pail 67359
Dayton Superior Polyfast FS is a one-component polymer-modified portland-cement mortar in a 50 lb pail for vertical, overhead, and horizontal concrete. Just add water, trowel a putty-like mix, and the repair gains high early strength on bridges, parking structures, and precast.
- Trowel work holds on walls, soffits, and floors without a separate bonding agent
- The batch is placed within about 10 minutes of mixing
- Shrinkage-compensated mix holds structural patches from 1/4 in to 2 in neat
$65.78
Availability:
Out of stock
Dayton Superior Polyfast FS
Dayton Superior Polyfast FS is a one-component polymer-modified portland-cement mortar in a 50 lb pail for vertical, overhead, and horizontal concrete. Just add water, trowel a putty-like mix, and the repair gains high early strength on bridges, parking structures, and precast. Product code is 67359. The batch is placed within about 10 minutes of mixing. Initial set is about 30 minutes at 72 F.
Key Features
- One-component polymer mortar is used on vertical, overhead, and horizontal repairs
- The mix needs only water and holds a putty consistency for trowel work
- The batch is placed within about 10 minutes of mixing
- Shrinkage-compensated mix holds structural patches from 1/4 in to 2 in neat
- Initial set is about 30 minutes at 72 F
Applications
- Bridges, tunnels, and parking structures that need a polymer repair mortar
- Walls, columns, and soffits that need a putty-like trowel mix
- Precast pipes, beams, and steps that need a one-component patch
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | Polymer-modified portland-cement repair mortar |
| Pack | 50 lb pail |
| Product code | 67359 |
| Water | 3.5 to 4 qt per 50 lb pail |
| Place time | Within about 10 minutes of mixing |
| Initial / final set | 30 min / 80 min at 72 F |
| Thickness neat | 1/4 in to 2 in |
| Thickness additional lifts | Up to 6 in |
| Compressive 1 day | 2,000 psi |
| Compressive 28 day | 7,000 psi |
| Yield | 0.42 cu ft per 50 lb pail |
Product documents: Dayton Superior Polyfast FS Data Sheet (PDF)
Frequently Asked Questions
What repairs is Dayton Superior Polyfast FS used on?
Vertical, overhead, and horizontal concrete on bridges, tunnels, parking structures, dams, walls, columns, and precast.
What pail size is Dayton Superior Polyfast FS?
This listing is a 50 lb pail, code 67359. Mix with 3.5 to 4 qt of water.
What place time does Dayton Superior Polyfast FS have?
Mix only what can be placed within about 10 minutes. Initial set is about 30 minutes at 72 F.
What thickness does Dayton Superior Polyfast FS allow?
1/4 in to 2 in neat. Additional lifts go to 6 in, or extend with pea gravel above 2 in.
What compressive strength does Dayton Superior Polyfast FS reach?
About 2,000 psi at 1 day, 5,500 psi at 7 days, and 7,000 psi at 28 days.
What bonding agent does Dayton Superior Polyfast FS need?
None in the mix. Polymer is built in. A scrub coat of fresh mortar is placed on an SSD substrate before the trowel pass.
Please complete your information below to login.