Parcel Orders over $300 Ship Free.
Dayton Superior J40 1 Gallon Acrylic Bonding Agent 69082
Dayton Superior Acrylic Bonding Agent J40 is a non-reemulsifiable acrylic bonding agent and admixture in a 1 gallon jug for new-to-old concrete, masonry, and stucco. Used neat, the Type 2 film holds a high-strength interface that does not re-emulsify after cure.
- Type 2 acrylic stays non-reemulsifiable after the film cures
- Place mortar while the film is still wet
- The same jug dilutes as an admixture in repair mortars and stucco
$41.01
Availability:
Out of stock
Dayton Superior Acrylic Bonding Agent J40
Dayton Superior Acrylic Bonding Agent J40 is a non-reemulsifiable acrylic bonding agent and admixture in a 1 gallon jug for new-to-old concrete, masonry, and stucco. Used neat, the Type 2 film holds a high-strength interface that does not re-emulsify after cure. Product code is 69082. Place the mortar while the film is still wet. Interior or exterior, horizontal or vertical.
Key Features
- Ready-to-use Type 2 non-reemulsifiable acrylic
- Place mortar while the film is still wet
- The same jug dilutes as an admixture in repair mortars and stucco
- The admixture holds freeze-thaw resistance on patches and cement coatings
- Interior or exterior, horizontal or vertical
Applications
- New-to-old concrete that needs a Type 2 bonding film
- Masonry, stucco, and terrazzo that need a non-reemulsifiable acrylic
- Repair mortars that need J40 as an admixture
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | Non-reemulsifiable acrylic, ASTM C1059 Type 2 |
| Pack | 1 gallon jug |
| Product code | 69082 |
| Bond 14 day | 1,865 psi ASTM C1042 |
| Bond 28 day | 2,436 psi ASTM C1042 |
| Bond-coat coverage | 200 to 300 sq ft per gallon |
| Admixture | Replaces 1 to 3 parts of mix water |
| VOC | Less than 50 g/L |
| Shelf life | 18 months unopened |
| Keep from | Freezing |
Product documents: Dayton Superior Acrylic Bonding Agent J40 Data Sheet (PDF)
Frequently Asked Questions
What work is Dayton Superior Acrylic Bonding Agent J40 used on?
Bonding patches and new concrete, masonry, stucco, terrazzo, and portland cement-sand mixes to horizontal and vertical concrete. Interior or exterior.
What jug size is Dayton Superior Acrylic Bonding Agent J40?
This listing is a 1 gallon jug, code 69082. Do not thin when used as a surface bonding agent.
What wet-film wait does Dayton Superior Acrylic Bonding Agent J40 need?
Place the cementitious material while the film is still wet. Do not let the bonding agent dry first.
What admixture use does Dayton Superior Acrylic Bonding Agent J40 have?
Dilute with up to 3 parts potable water and replace mix water in cement-based materials. 2:1 or 1:1 gives higher performance.
What bond strength does Dayton Superior Acrylic Bonding Agent J40 reach?
About 1,865 psi at 14 days and 2,436 psi at 28 days per ASTM C1042 Type 2.
What freeze-thaw help does Dayton Superior Acrylic Bonding Agent J40 give?
As an admixture it improves freeze-thaw resistance on mortars, patches, and cement-based coatings.
Please complete your information below to login.