Parcel Orders over $300 Ship Free.
Dayton Superior Anchor All 50lb Pail 143407
Dayton Superior Anchor All is a fast-setting non-shrink anchoring cement in a 50 lb pail for bolts, posts, rails, and fixtures in concrete. The pourable mix sets in about 15 to 20 minutes and the controlled expansion locks the fixture.
- Set is about 15 to 20 minutes after mixing
- One-hour compressive strength is about 1,000 psi
- This listing is a 50 lb pail, code 143407
$59.36
Availability:
Out of stock
Dayton Superior Anchor All
Dayton Superior Anchor All is a fast-setting, non-shrink anchoring cement with controlled expansion. It is used to lock bolts, posts, rails, and dowels into concrete on interior and exterior work. This 50 lb pail, code 143407, mixes pourable with about 6.75 pints of water. Set is about 15 to 20 minutes. One-hour compressive strength is about 1,000 psi.
Key Features
- Fast-setting cement holds bolts, posts, rails, and dowels in concrete
- Controlled expansion locks the fixture as the mix hardens
- Pourable mix fills voids around the washer and rod
- Set is about 15 to 20 minutes
- 28-day compressive strength reaches about 7,500 psi
Applications
- Bolts, rails, posts, and dowels that need a pourable anchoring cement
- Interior fixtures that need a 15 to 20 minute set
- Exterior concrete that needs a non-shrink anchoring cement
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | Non-shrink anchoring cement |
| Set time | 15 to 20 minutes neat |
| Compressive 1 hour | 1,000 psi |
| Compressive 24 hour | 4,500 psi |
| Compressive 7 day | 6,000 psi |
| Compressive 28 day | 7,500 psi |
| Water | 6.75 pints per 50 lb |
| Pack | 50 lb pail |
| Product code | 143407 |
| Mix window | Use within 5 to 10 minutes |
Product documents: Dayton Superior Anchor All Data Sheet (PDF)
Frequently Asked Questions
What fixtures is Dayton Superior Anchor All used on?
Bolts, rails, posts, and dowels in concrete that need a non-shrink, rapid-setting anchoring cement.
What pail size is Dayton Superior Anchor All?
This listing is a 50 lb pail, code 143407. Mix with about 6.75 pints of water, or 1:7 water to powder by weight.
What set time does Dayton Superior Anchor All have?
About 15 to 20 minutes neat. Mix only what can be placed in 5 to 10 minutes.
What early strength does Dayton Superior Anchor All reach?
About 1,000 psi at 1 hour and 4,500 psi at 24 hours (ASTM C109).
What hole prep does Dayton Superior Anchor All need?
Scrub the hole with water, then remove standing water so the concrete is damp. A washer on the anchor improves pull-out.
What 28-day strength does Dayton Superior Anchor All reach?
About 7,500 psi. Do not disturb the fixture until the cement has enough strength.
Please complete your information below to login.