AggreGloss J25 is a 25% methacrylate sealer that dries to a high-gloss film on decorative concrete and pavers.
AggreGloss J25 is a 25% solids methacrylate sealer in aromatic solvent that dries to a clear, high-gloss film. It seals, dustproofs, and enriches the look of stamped concrete, exposed aggregate, and pavers while letting the substrate breathe. Apply two light coats with a low-pressure sprayer on a clean, dry substrate. Use it outdoors. Do not use in enclosed interiors. Also available as the AggreGloss J25 5 gal pail.
| Property | Value |
|---|---|
| Chemistry | 25% methacrylate copolymers in aromatic solvent |
| Finish | High gloss |
| Coverage, first coat | 200 to 300 sq ft/gal |
| Coverage, second coat | 400 to 600 sq ft/gal |
| Dry time | Temperature, humidity, and wind dependent |
| VOC | Less than 700 g/L |
| Min concrete age | 7 days |
| Interior use | Not for enclosed interiors |
| Shelf life | 24 months, unopened |
| Packaging | 55 gal drum |
Product documents: AggreGloss J25 Technical Data Sheet (PDF)
What is AggreGloss J25?
A 25% methacrylate sealer that dries to a clear high-gloss film on stamped concrete, exposed aggregate, and pavers.
Can it be used indoors?
No. It is not intended for enclosed interiors. Use a water-based sealer for interior work.
How old should the concrete be?
A minimum of 7 days before sealing.
How do the pack sizes compare?
Same published sealer in two packs. This page is the 55 gal drum. Also: AggreGloss J25 5 gal pail.
Please complete your information below to login.