Sika SikaTop 144 Gray 5 Gallon 91152

SikaTop-144 is a polymer-modified, two-component, cementitious coating. Designed for use on concrete, mortar, and masonry substrates. Easily applied by brush, roller, or spray equipment. This fine-textured, abrasion resistant coating is used for protection against deicing salts and for damp-proofing/waterproofing.

Uses
Use on grade, above, and below grade on concrete, masonry, and mortar.
Use on horizontal, vertical, and overhead surfaces, both interior and exterior.
Potable water tanks.
Use as a coating over newly repaired concrete to provide a monolithic/uniform appearance.
Use as a protective coating to reduce the affect of deicing salt on concrete.
Use as a protective coating for waterproofing, dampproofing, and improved resistance to weathering.
Use on concrete and masonry substrates to improve abrasion resistance to foot traffic and light pneumatictire traffic.
Use to coat the backside of architectural curtain wall panels to prevent water intrusion from the outside.

Bond strength ensures superior adhesion. Increases resistance of substrate to deicing salts. No mix water needed, liquid co-polymer triggers special blend of cements, fillers, and admixtures. Superior abrasion resistance. No batching, factory proportioned unit ensures consistent composition and high quality. Nonflammable; low odor. Easily applied to clean, sound substrates. Approved for use in contact with potable water. May be overcoated with Sikagard® protective coatings.