|Name||Adhesive Technology Ultrabond 1 22oz Case 12 A22-1N|
|Description||Adhesives Technology ULTRABOND 1 is a 2-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 degrees to 110 degrees Fahrenheit. ULTRABOND 1 in cartridges has been tested in accordance with ASTM E488 and ASTM E1512 for its capability to resist static, dynamic, seismic and wind loads in uncracked concrete for both threaded rod and rebar.
Moisture insensitive allowing installation and curing in damp environments. Withstands freeze-thaw conditions. Little or no odor. High modulus. In-service temperature range between 35 degrees and 180 degrees Fahrenheit
Anchoring threaded rods, bolts and rebar dowels into uncracked concrete
Short and long term tensile anchoring, including wind, seismic and shear forces in accordance with allowable stress design (ASD)
Grouting dowel bars and tie bars for full depth concrete pavement repairs
Bonding agent for fresh to hardened concrete, and hardened to hardened concrete
See datasheet for full specifications. Requires applicator gun.